Broken Breakers, Part 7

April 24, 2012
Sometimes, it would be more accurate to call breaker maintenance "breaker breaking" because of the way it gets done

Sometimes, it would be more accurate to call breaker maintenance "breaker breaking" because of the way it gets done. Common breaker maintenance mistakes include:

  • Dimensional adjustments (e.g., contact wipe). Adjust per the manufacturer's recommendations, but only if they need to be adjusted.
  • Bolted bus connections. Retightening these "just in case they are loose" weakens them. Instead, conduct conductivity measurements across the connections using an AC resistance meter (and infrared inspection prior to breaker maintenance) to identify which connections need corrections. Disassemble and clean, installing any new hardware (e.g., lockwashers) possible, and then tighten to the recommended torque.
  • Lubrication. Use only the lubricant recommended by the manufacturer. If you mix incompatible greases, the resulting compound may be extremely abrasive. Always clean before lubricating, and apply only the recommended amount of lubricant.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.