AC or DC General-Use Snap Switches

AC or DC general-use snap switches may be used for control of inductive loads not exceeding _____% of the ampere rating of the switch at the applied voltage.

a) 50
b) 75
c) 90
d) 100

See answer and applicable Code reference

The correct answer is: a) 50%

Snap switches shall be used as noted in Section 404.14(A) through (F) of the 2011 NEC. As noted in 404.14(B)(2), the use of general use snap switches sui

Register to view the full article

Register on EC&M and gain access to premium content, including this article and much more.

Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish