Faster, Cleaner, Cheaper

Nov. 1, 2008
As I see it, for a new technology to be successful, it has to be many things. It must be faster than its predecessor or — at the very least — allow you to install it more quickly.

As I see it, for a new technology to be successful, it has to be many things. It must be faster than its predecessor or — at the very least — allow you to install it more quickly. It should also run cleaner from an environmental perspective or be cleaner to produce (i.e., “greener”). In addition, it should be less costly to produce, be offered at a lower price, and run more efficiently than competing technologies. Oh, I almost forgot. It must also have a longer life span than the technology it's replacing. It's challenges like these that keep inventors, research scientists, business development managers, and manufacturing personnel up at night.

We all know lighting and motor loads consume the bulk of the power that is produced across the country. For example, most reports I see indicate that lighting accounts for roughly 25% to 40% of the energy consumed in commercial buildings. In the industrial arena, studies show that motors account for anywhere from 50% to 75% of the energy consumed in manufacturing plants and production facilities. New technology introductions in these areas can have a real and immediate impact on the bottom line.

Compact fluorescent lamp and light-emitting diode (LED) technology has taken the lighting world by storm in the last few years. Both lamp types are competing to replace the workhorse of the lighting world: the incandescent lamp. Some industry observers feel it's only a matter of time before the incandescent lamp becomes obsolete. If you throw other lighting technologies into the mix, such as automated control products and systems, the energy savings for the end-user can be quite substantial.

In the motor world, the push for many years has been on the high-efficiency front. Today's energy-efficient motors are constructed to produce the same power but use less electricity. This is accomplished by using lower-electrical-loss steel in the core, more copper in the windings, reduced friction bearings, and more aerodynamic cooling fans. Couple these high-efficiency motors with speed and frequency control products, and energy consumption levels can be slashed.

All of these developments have been beneficial to manufacturers and end-users. However, one technology I've been anxiously awaiting to reach commercialization is high-temperature superconducting (HTS) power equipment. The widespread use of HTS wires in motors and generators could significantly reduce energy loss and increase power output in these pieces of equipment. However, as you'll see in our cover story this month, starting on page 30, the road to commercialization for these types of products has been painfully slow.

My hope is that as time goes on, more and more electrical engineers will see the tremendous upside of this unique technology and help push its development at a much faster rate than what we've seen to date.

About the Author

Michael Eby

Mike received a B.S. degree in electrical engineering in 1986 and an M.S. degree in engineering management in 1994 from the University of South Florida. He is currently a member of the National Fire Protection Association (NFPA), Institute of Electrical and Electronics Engineers (IEEE), Association of Energy Engineers (AEE), and American Society of Heating, Refrigeration and Air-Conditioning Engineers (ASHRAE).

Prior to joining EC&M as Editor-in-Chief in September 1999, Mike served as the Executive Editor of Transmission & Distribution World magazine for five years. He currently serves as the Senior Director of Content - Buildings Group in the Infrastructure & Intelligence Division at Informa. Before joining Informa, Mike held various engineering titles within the Substation and Transmission Engineering Groups at Florida Power & Light Co., Juno Beach, FL.

Mike was awarded the Southeastern Electric Exchange (SEE) Excellence in Engineering Award in 1993 and has received numerous regional and national editorial awards for his reporting and writing work in the electrical market.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.