Safety, August 28, 2012

Aug. 28, 2012
What to do when you smell a chemical spill

You are just finishing up some work in a branch circuit panel when a strong chemical smell hits. What should you do? A strong smell means there's some kind of leak or spill. Any time there's a leak or a spill, leave the area immediately.

Don't:

  • Wait to see if it gets worse; your ability to smell it will weaken with time.
  • Put things away; time might run out before you're done.
  • Try to locate the source of the smell. Maybe there's a valve you can close, but how do you know you won’t be overcome by fumes before you get there?

The logic of airline safety announcements applies here. Help yourself first so that you can help others. That means leave. On your way out, warn others that there's a spill and they need to leave the area — but don't stop walking while you're talking.

After you reach safety, report the problem to the first supervisor you can find. Then report to your own supervisor.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.