ECM Buyers' Guide

What's Wrong Here?

Nov 13, 2007 10:59 AM, By Joe Tedesco, NEC Columnist

Hint: Indecent exposure.

Think you know how this installation violates the NEC?

I discovered this installation in Wilmington, N.C., while on vacation last summer. It was located on the waterfront, and it sure was scary, especially if the circuit was energized. I also wondered about the rest of the temporary open lampholders that were run along the entire length of this famous boardwalk. This arrangement and type of equipment presents possible electric shock hazards and should be removed immediately.

Here is just one of the many rules I could cite with this substandard installation:

110.2 Approval. The conductors and equipment required or permitted by this Code shall be acceptable only if approved. FPN: See 90.7, Examination of Equipment for Safety, and 110.3, Examination, Identification, Installation, and Use of Equipment. See definitions of Approved, Identified, Labeled, and Listed.”

> Try Another Quiz

Want to use this article? Click here for options!

product of the week

Firestop Foam

October 13, 2008 9:51 AM

Abesco Firestop Foam

View all 2008 Products of the Week

Recent Comments




Arc Flash Conferences   Code Change Conferences

www.createyourcountdown.com

Professionals provide answers to your questions.


iGard Resistance Grounding Q&A BookletDownload the Resistance Grounding Q&A Booklet
I-Gard
EC&M TV

Arlington Indoor InBox

Easy install makes Indoor InBox preferred for power & low voltage applications. Furniture and appliances stay close to the wall!...

Listen
"Sizing Gen-Sets: Facts, Hints, and Good Judgment"
Listen
Sponsored By:

Learn how HRG technology can mitigate and reduce the arc flash hazard; design considerations to remember when specifying and installing an HRG system.
On-Demand Webinar
- Sponsored by I-Gard

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

rss icon

rss

Browse Back Issues

Browse Back Issues