Photo by Al Barry/Three Lions/Getty Images
Ecmweb 18128 Broken Bulb Gettyimages 3332447 1024

NEMA White Paper Evaluates Surge Susceptibility of Electrical Components

March 6, 2018
The technical committee on low voltage surge protective devices tested a variety of devices against nine different surge wave forms.

The effects of voltage surges on electrical and electronic equipment are difficult to characterize in a way that relates to real-world working conditions, but questions such as, ‘How many surges does it take to damage my equipment’ or ‘how much longer will my equipment last with and without surge protection?’ arise with almost every application. Although there are testing standards in place, those tests normally are conducted under standard lab conditions and don’t address the variable effects of temperature, power quality and other important factors.

The Low Voltage Surge Protective Devices technical committee at the National Electrical Manufacturers Association (NEMA), Rosslyn, VA, was asked to look at the issue and provide an overview of electrical and electronic equipment surge susceptibility. This week the committee released a report on its findings.

The new white paper, “NEMA VSP 1-2017 Susceptibility of Electrical and Electronic Components to Surge Damage,” looks at the surge effects of several common pieces of electrical equipment including incandescent, fluorescent and LED lamps, control transformers, variable frequency drives and uninterruptable power supplies. The devices were tested against nine different surge wave forms at certified testing laboratories in a setting recreating a real-world surge environment. The paper presents a table showing the number of surges of a particular type each device withstood before failure.

“This white paper helps the electrical community—engineers, consumers, and technicians— understand the various transient conditions to which electrical and electronic equipment may be subjected. The intent is to create awareness and offer guidance based on real-world testing on protection that will be helpful to preventing problems with products,” said James Moellmann,  director of Standards/Application Engineering at MVC–Maxivolt, and chairman of the NEMA 05VS, Low Voltage Surge Protective Devices, Technical Committee.

Here's the report (PDF): Susceptibility of Electrical and Electronic Components to Surge Damage

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.

Champion Strut Catalog

Champion Fiberglass is the most advanced manufacturing facility of fiberglass conduit, fiberglass bridge drain and fiberglass strut systems in the world. Its well-trained and ...

8 Types of Electrical Conduit and Their Uses

Electrical conduit is a tube or raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...