Ecmweb 6411 Alstom Saft
Ecmweb 6411 Alstom Saft
Ecmweb 6411 Alstom Saft
Ecmweb 6411 Alstom Saft
Ecmweb 6411 Alstom Saft

EDF Group Orders Energy Storage System Using Li-ion Batteries

June 16, 2014
Alstom's MaxSine eStorage solution, connected to Saft's Intensium Max 20M storage system, will be installed on EDF R&D's experimental "Concept Grid."

The Alstom-Saft consortium has signed a frame contract with the EDF group to supply an initial energy storage system using a container of Li-ion batteries, demonstrating the system’s ability to regulate the frequency of the grid. Alstom's MaxSine eStorage solution, connected to Saft's Intensium Max 20M storage system, will be installed on EDF R&D's experimental "Concept Grid," dedicated to the development of grids and smart electrical systems. Located on the EDF site of Les Renardières south of Paris (Seine-et-Marne region), this is the first installation of its kind in France. The storage system and the power converter will be delivered in late 2014.

Frequency is an indicator of the grid stability; it represents the balance between energy produced and energy consumed. To maintain this balance (and therefore the frequency), the operator uses the energy available through the primary reserve, mainly ensured by thermal or nuclear power plant operators, by blocking part of their production capacity.

Battery storage systems provide producers and grid operators with more flexibility over the energy supply immediately available. In the event of an imbalance between production and consumption, the storage system can either release energy into the grid, or store it in a few hundred milliseconds, thus controlling the frequency of the network. The experiments by EDF R&D will evaluate the ability of such a system to regulate the frequency, and particularly the adjustment potential of the primary reserve.

As part of this contract, Alstom and Saft provide the complete 1MW/30 min. energy storage and conversion system. Saft will supply its Intensium Max 20 foot lithium-ion battery container, while Alstom will install its MaxSine eStorage solution. Alstom's MaxSine eStorage includes a power converter that connects the Direct Current (DC) battery to the Alternating Current (AC) grid, and converts the electricity between DC and AC to be stored or released into the grid. It also includes real-time energy storage management software to optimise the production of electricity according to the needs of the grid.

Alstom and Saft have already collaborated on the smart grid demonstration project Nice Grid (in Nice, France), installing in late 2013, a 1MW battery energy storage system to address the risk of grid instability in the event of a massive influx of intermittent solar energy.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.