Code Quiz: Door Stops and Cover Plates

Dec. 6, 2012
NEC rules for positioning external hinged doors or covers when installing metal-clad power switchgear (over 600V).

Fill in the blank with the appropriate answer.

When installing metal-clad power switchgear (greater than 600V), the external hinged doors or covers must be  ___________ .

A. provided with stops to hold them in the open position

B. provided with a full-length hinge

C. lockable.

D. provided with a viewing window

Answer: A

To be compliant with Section 490.38 of the 2011 NEC, when installing metal-clad power switchgear (greater than 600V) the external hinged doors or covers must be provided with stops to hold them in the open position.

Owen is the owner and president of National Code Seminars and the holder of master electrician certifications in 46 states. He can be reached at [email protected].

About the Author

Steven Owen

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.