Code Quiz: Panic Hardware

Nov. 7, 2013
NEC rules on requirements for panic hardware on personnel doors of electrical equipment rooms

With respect to the requirement of panic hardware on personnel doors of electrical equipment rooms, this hardwareis now required to be____________ per the 2014 NEC.

A. approved

B. labeled

C. listed

D. of any type (there are no specific requirements)

Answer: C

As noted in 110.26(C)(3) of the 2014 NEC, "Where equipment rated 800A or more that contains overcurrent devices, switching devices, or control devices is installed and there is a personnel door(s) intended for entrance to and egress from the working space less than 25 ft from the nearest edge of the working space, the door(s) shall open in the direction of egress and be equipped with listed panic hardware."

This same type of wording is also featured in Sec. 110.33(A)(3).

Owen is the owner and president of National Code Seminars and the holder of master electrician certifications in 46 states. He can be reached at [email protected].

About the Author

Steven Owen

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.

Champion Strut Catalog

Champion Fiberglass is the most advanced manufacturing facility of fiberglass conduit, fiberglass bridge drain and fiberglass strut systems in the world. Its well-trained and ...

8 Types of Electrical Conduit and Their Uses

Electrical conduit is a tube or raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges...

Xpress Elbows Guide for Industrial Construction

Learn how to get expedited elbows shipped within 2 days.