Ecmweb 4878 211ecm15pic1
Ecmweb 4878 211ecm15pic1
Ecmweb 4878 211ecm15pic1
Ecmweb 4878 211ecm15pic1
Ecmweb 4878 211ecm15pic1

What's Wrong Here?

Nov. 1, 2002
All of the feeder and branch-circuit.

How well do you know the Code? Think you can spot violations the original installer either ignored or couldn't identify? Here's your chance to moonlight as an electrical inspector and second-guess someone else's work from the safety of your living room or office. Joe Tedesco, who has a knack for finding shoddy electrical work, did the dirty work and found this mess. Now it's your turn to identify the violation.

Find the Answer

Robert McCullough, director of the Ocean County Construction Inspection Department, Toms River, N.J., correctly identified the following Code violations in this photo.

“110.14 Electrical Connections — improper connection of dissimilar metals; 110.14(A) — The terminal is not approved for more than one conductor, although it appears that the aluminum EGC doesn't even terminate in the lug; 408.20 — The installation requires a terminal bar; 250.12 — It looks like the paint wasn't removed from the panelboard enclosure to ensure good electrical contact; 250.8 — The screw attaching the lug appears to be a sheet metal screw; 250.119 — A bare EGC seems to be coming out of the yellow wire nut spliced to a black wire going to the lug. Because a washer is placed under the screw, the screw may be smaller than the hole in the lug and thus would not be a secure connection. Finally, the term ‘subpanel’ is not recognized in the NEC.”

> Try Another Quiz

About the Author

Joe Tedesco

Tedesco served the industry in many roles during his career. He was a director, senior electrical code instructor for National Technology Transfer, Inc. and American Trainco, Inc.. He was also a codes, standards and seminar specialist for the International Association of Electrical Inspectors and an electrical field service specialist for the National Fire Protection Association in Quincy, Mass. He ran his own business as an NEC consultant and is a Massachusetts licensed master electrician and journeyman electrician and certified electrical inspector (one and two family 2A; General 2B, and Plan Review, 2C). Tedesco also wrote articles for CEE News and EC&M (Code Violations Illustrated and What's Wrong Here?) for more than 15 years and helped launched the Moving Violations video series.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Don't Let Burn-Through Threaten Another Data Center or Utility Project

Get the No Burn-Through Elbow eGuide to learn many reasons why Champion Fiberglass elbows will enhance your data center and utility projects today.

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.