Wireway Conductor Fill Limitation

March 17, 2014
NEC requirement on the conductor fill allowed in a metal wireway.

The sum of the cross-sectional areas of all contained conductors at any cross-section of a metal wireway shall not exceed _____.

a) 50%
b) 20%
c) 25%
d) 75%

See answer and applicable Code reference

The correct answer is: b) 20%

Article 376 of the 2011 NEC presents the requirements for installation of metal wireways. As clearly noted in 376.22(A), "The sum of the cross-sectional areas of all contained conductors at any cross section of a wireway shall not exceed 20% of the interior cross-sectional area of the wireway."

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.