Arc Flash Solutions: Arc flash blankets
These arc flash suppression blankets are manufactured from fiberglass with a proprietary silicone mixed coating that enhances its flame-resistant properties. The blankets are offered in 15kA and 40kA models along with two standard sizes measuring
4 ft × 5 ft and 4 ft × 8 ft for each level of protection (custom sizes are available). The 15kA version is a single-layered product with grommets offering a BTP rating of 213. The 40kA model is a double-layered product with grommets offering a BTP rating 509. Either side of the blanket can be used to protect against an arc flash.
Arc Flash Solutions
AEMC Instruments: Current probes
Model LM102 (current) and LM103 (voltage) AC current probes feature high-performance magnetic material. Suitable for use with multimeters, data loggers, and power analyzers, the probes meet the latest IEC safety and performance standards. They also allow meters to measure AC currents in low-power secondary or industrial applications. The 0.63-in. (16-mm) clamping diameter accommodates most conductors. Features include measurement ranging from 0.1A to 200A (LM103) and 50mA to 200A (LM102), overrange up to 350A continuous, 1mA/A output (LM102) and 1mV/A output (LM103), and frequency response from 48kHz to 10kHz.
Hubbell Commercial Construction: Bell Outdoor LED swivel floodlights
Bell Outdoor LL1200 and LL800 LED swivel floodlights are designed for outdoor wet location use. The LL1200 commercial-grade model is suitable for use on 120/277VAC circuits. Featuring a locking swivel joint for easy light adjustment, the product offers 1,200-lm output while using only 13W. The 120VAC LL800 model features a swivel ball joint for easy light adjustment and offers 800-lm output. Both models are NEMA 3R-compliant and feature a CCT of 2,700K, a 50,000-hr life, diffused tempered glass lenses, ½-in. NPT threads with 6-in. wire leads, and die-cast aluminum construction with powder-coat finishes in white, bronze, and gray.
Hubbell Commercial Construction
Cree Lighting: Linear luminaires
The Stylus Linear Series features dimming down to 1%, several combinations of optics and mounts to mix and match, and a housing design to fit virtually any ceiling type. Available in suspended, recessed, surface- mount, and wall-mount styles with uplight and downlight options for suspended and wall-mount models, the luminaires offer 90+ CRI TrueWhite Technology across 30K, 35K, and 40K CCTs. In addition, the products can run 2-ft to 72-ft increments at 120V with just one power drop.
HellermannTyton: Temporary signs
These temporary signs measure 8.5 in. × 11 in., with a micro-perforation to split each one into two 8.5-in. × 5.5-in, signs if desired. ANSI-compliant, the signs are suitable for creating temporary warnings or safety signage. In addition, the surface material resists moisture and chemicals yet can be printed with a standard inkjet or laser printer. The entire backing can be removed for maximum adhesion, or a thin strip can be removed from the top and bottom edges to expose a minimum amount of adhesive for faster sign removal.
Jonard Tools: Adjustable hole cutter
The AHC-10 adjustable hole cutter is designed for cutting 2.2-in. (55-mm) to 10-in. (254-mm) round holes in plywood, plasterboard, and acrylic sheet up to 11/16 in. (2.7 cm) thick. Cutting depth is adjustable via a hex locknut and compression spring while a shield collects dust and prevents chips from eye injuries. A rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris. Compatible with any variable-speed drill, the product includes a compression spring that absorbs vibrations while cutting.
Klein Tools: Hard hats
These 10 hard hats include a breathable, padded sweat-wicking band and top pad for enhanced comfort — and are manufactured with anti-microbial and odor control materials. Features include a one-handed adjustment with large knob ratchet mechanism that pivots to clear bandanas or pony tails, while flexible, open-frame suspension provides enhanced air circulation. In addition, the rear neck pad hugs the head for a secure fit.
LUTZE: Cable entry system
Cablefix X is designed to simplify installation without compromising ingress protection. The X membrane seals are closed by default, eliminating the need to plug unused entry points. Rated Type 4X, 12, and 13 with a protection class of IP65, the product comes with 12 or 23 entry points, requires only one enclosure cutout, and can be installed onto enclosures of any wall thickness with four mounting bolts. For enclosures with a wall thickness of
1.5 mm, a snap-in mounting option is available. Offering the ability to easily install cables by pushing the end through the seal from the front, the product features a standard 112-mm × 36-mm cutout. In addition, it is compatible with all major control cabinets and electrical enclosures.
Remee Wire & Cable: Security and alarm cables
Vigilance Security & Alarm Cables come in three models. The 725 Series is a standard plenum-rated cable for 300V control, instrumentation, security, and alarm installations. It features RemGuard Plenum Polymer insulation and jackets over stranded copper conductors. Shielded and unshielded versions are offered with a selection of AWG sizes and number of conductors. The 900 & R00 Series are Riser-rated versions of most of the 725 Series. With PVC insulation and jackets, these models are more flexible than their plenum-rated counterparts. They include stranded copper conductors and a choice of shielded or unshielded versions. The Video/CCTV Series includes a selection of RG59/U Composite Video coax cables with braid shields, as well as Siamese versions with an added power pair, in both plenum-rated and riser-rated versions. Water-blocking tape is available for direct burial use on braid-shielded coax cables, with or without a power pair. The Siamese direct burial version with the power pair features both the coax and the power pair bundled under an overall outer PVC jacket.
Remee Wire & Cable
RIDGID: Wet/dry vacuums
The redesigned NXT line of 6-, 12-, 14-, and 16-gal wet/dry vacuums now features a front-to-back top carry handle for enhanced grab-and-go maneuverability as well as comfort-grip side handles for extra ease in lifting, carrying, or emptying the vac. A drum key and side latches create a tighter lid-to-drum seal to keep dirt, dust, and debris inside the product. Other features include a larger on/off switch for easier operation with gloved hands and a built-in cord wrap. Also included is an ultra-flexible locking hose that won’t pull loose and is four times more durable than a standard hose. The 12-, 14-, and 16-gal models include an updated utility nozzle that delivers a 77% increase in pickup power, according to the company.
Weather Guard: Lighted truck box
The 127 Saddle Box with Integrated Lighting is a heavy-duty truck tool box that features a pre-installed lighting system. Users simply connect the wiring harness, compatible with all full-size trucks in North America, to the power supply of their truck and the lighting system is activated. When the lid is opened, the product’s responsive, ultra-bright LED lights illuminate the box’s contents. The system consists of long-lasting and low-power consumption rear-mounted lighting, lasting a minimum of 20,000 hr, while the frosted diffusers eliminate glare. The wide light dispersion is designed for maximum visibility while meeting the IP66 requirement for durability against water and dust intrusion. Available colors include matte black and clear.