Emerson: Hazardous location panelboard
The Appleton PlexPower Fiber Panel for hazardous locations serves as a single point of control for power and fiber communication cables. The panelboard incorporates Belden MIPP fiber splice boxes that minimize installation time for fiber patching and enable easy access during routine maintenance. In addition, the product allows for organizing and managing up to 12 ST (Straight Tip connector), SC (Subscriber Connector) and LC (Lucent Connector) type fiber connections. Features include circuit breaker modules that provide explosionproof protection for standard off-the-shelf breakers. Breakers can be easily replaced, upgraded, or added in the field with no bolted cover to remove, no need for sealing or rewiring, and no danger of compromising flame path integrity.
Southwire: Circuit puller
The Maxis XD1 circuit puller is lightweight and portable, offering easy, one-person set-up and operation. Designed to accept most commercial 18V drills, the product delivers continuous pulling power up to 600 lb with a peak of 1,000 lb. Features include a removable capstan to facilitate rope removal, expandable length with 1-in. rigid conduit, a polyline pin on capstan to prevent rope slippage during the pull, and a threaded receiver for ¾-in. monopole support.
iToolco: Cable reels
The Cable Mate 2-Pack allows users to carry two 250-ft coils of metallic and no-metallic MC cable. Suitable for residential tenant build outs and small commercial electrical installations, the 40-lb unit measures 26 in. x 29 in. by 19.5 in and includes two detachable reels that prevent tangling. Featuring all-welded steel construction, the folding stand is designed to set up within seconds and allows the products to rotate smoothly while feeding conductors.
Pure Safety Group: Safety harness
The Guardian Fall Protection S1 safety harness meet OSHA standards, exceed ANSI standards and are CSA-certified. Designed with water-resistant contrasting core webbing, label cover and impact indicators for easy inspection, the harness comes in four sizes and includes dual lanyard keepers and rubber web keepers. Features include steel hardware with a 3-bar torso adjustment for quick and proper fitting, various connection point options for use in multiple applications, and a chest strap captivation.
Pure Safety Group
Platinum Tools: Cable tester kit
The T130K4 cable tester kit for VDV MapMaster 3.0 is designed for installers of Ethernet and coax networks. The kit is contained in a durable plastic case (p/n 4082) with an EVA foam insert to hold all components in place, with additional places to hold up to eight test and map Smart Remotes. Along with cable adapters for different coax connectors, the kit also includes two no-fault RJ12-to-RJ12 patch cables for testing voice cables, two 5-in. shielded patch cables, and an RJ45-to-alligator clips cable for toning two wire cables. In addition, the product features a Link Light function that allows blinking of the LED in a connected port to identify which port the cable is connected to.
ARGCO: Integrated fire extinguisher
The Automatic Mini Fire Extinguisher (AMFE) is designed to detect and extinguish a fire inside an electrical device. Available in 2.4 oz to 8.8 oz cylinders, the stand-alone device contains 3M Novec — a clean extinguishing liquid in an ambient state that cools the fire as a gas, eliminating damage to expensive equipment. Features include automatic activation at a set temperature, a mechanical release that works just like a sprinkler head, and a signal connection for monitoring. Rubber lined mounting brackets offer easy installation.
Molex: Wiring device
The Woodhead Watertite Extreme is a IP69K-rated, wet-location wiring device that comes in two models — the 14W47, which features FDA-approved vulcanized silicone rubber, and the 14W47-P petrochemical-grade version with oil-resistant vulcanized rubber. Designed to repel and inhibit bacterial growth, features include a three-piece cord grip, color-coded terminal screws, floating blade construction, rubber grommet, compression ring and a multiple seal plug/connector interface to keep out contaminants and resist vapor and water up to 2,000-psi washdown.