Ideal Industries: Cable preparation tool
The PrepPRO coax/UTP cable preparation tool eliminates the need to carry multiple tools or to make frequent tool adjustments based on the type of cable being stripped. According to the company, the tool prepares virtually any coaxial cable — ranging from large RG-6 Quad to RG-59 plenum — with industry-standard ¼ in. × ¼ in. strips in as few as two turns of its spinner ring. In addition, by replacing the primary blade cartridge with the included UTP/STP cartridge, the device can cleanly remove the outer jacket of Cat. 3/5e/6 cables. Other features include a spring-loaded jaw design and an ergonomic lever that can be actuated to set the blade by thumb or palm grip.
Nora Lighting: Downlight trims
These 4-in. die-cast aluminum square trims are for the company’s LED Diamond II 90+ Retrofit Series. Designed for use with standard round housings, the trims are available in three square flange styles with sharp edges for a contemporary appearance. The series includes a square flange with round reflector, a square flange with square 2-in. pinhole, and a square flange with square 2.75-in. regressed opening.
Kohler Power Systems: 3-phase generator
The 14/20kW air-cooled, 3-phase generator is a space-saving alternative to traditional liquid-cooled, 3-phase models. Powered by a commercial-grade engine designed for harsh weather conditions and heavy use, the generator starts up within 10 sec of an outage and can power major systems and appliances in a small business, including: HVAC, lights, security systems, computers, cash registers, coolers, and more. The company’s PowerBoost technology provides the necessary power to start large electrical loads without dropping other circuits or systems as they cycle on and off. In addition, the product runs on natural gas or liquid propane, can be remotely monitored from a computer, tablet or smartphone, and features a corrosion-resistant enclosure impact-tested to -30°F.
Kohler Power Systems
Ericsson: DC/DC converters
Offered in encapsulated packages for harsh environments, the PKE3000PI and PKE5000PI DC/DC converters accommodate 12V, 24V, and 48V systems. The PKE3000PI operates over an input voltage range from 9V to 36V, and the PKE5000PI operates from 18V to 75V. Each series offers four output voltages, delivering 3.3V/4.5A, 5V/3A, 12V/1.25A, and 15V/1A. Featuring a high efficiency of typically 89% at 12V out (full load), the modules measure
25.4 mm × 25.4 mm × 10.8 mm (1.00 in. × 1.00 in. × 0.4 in.), and meet requirements for board development purposes or remote-feed applications where voltages are delivered to the load via long cables.
Eaton’s Cooper Lighting Business: LED luminaire
The Portfolio surface-mount LED luminaire features the company’s WaveStream technology for glare-free illumination in standard and high-ceiling applications. AccuAim optics arranged in exacting patterns provide brightness control and visual comfort. Available in five packages ranging from 4,500 lm to 9,000 lm, the luminaires feature 2,700K, 3,000K, 3,500K, and 4,000K color temperatures and a CRI of 80 or 90. Mounting options include ceiling, wall, and pendant, or the product can be suspended by aircraft cables. In addition, the luminaire is offered in white, black, bronze, and silver finishes.
Eaton’s Cooper Lighting Business
Greenlee Communications: Fault locator
The 180XL Visual Fault Locator is designed to quickly visually locate macrobends, poor splices, bad connectors, and breaks in fibers. Featuring a universal 2.5-mm bulkhead, the fault locator is able to probe single-mode and multi-mode fibers. An optional 1.25-mm adapter is also available. In addition, the handheld, Class 2-compliant device can be used to confirm fiber continuity on fibers up to 7 km in length, and a 2-Hz modulation can be used to aid continuity confirmation.
Honeywell Safety Products: Hard hat
The North Force hard hat features 24% more back-of-head coverage than standard Type I hard hats, according to the company. Constructed of a lightweight shell material, the hard hat is designed to withstand extreme temperature changes ranging from -30°F to 120°F. In addition, the product offers a six-point suspension system with five adjustment areas. Available colors include: white, yellow, orange, blue, red, and green.
Honeywell Safety Products
Weidmuller: Power supplies
PROmax power supplies feature start-up at temperatures as low as -40°C, hazardous area approvals (UL, Class 1, Div. 2), and a 300% power boost. Designed for control panels specified for use in harsh environments as well as heavy industrial applications, the products offer an all-metal housing and DIN-rail mounting foot to ensure mechanical shock- and vibration-resistant operation. The power supply family includes 16 models with 5VDC, 12VDC, 24VDC, or 48VDC outputs for loads up to 40A. Voltage output may be adjusted via the front panel, and either series or parallel operation is standard on all units. A two-color LED provides local status output, and remote status monitoring is delivered through integrated relay contacts.
Sunpower: DIN-rail power supplies
DRC-40 (40W) and DRC-60 (60W) power supplies can mount to TS-35/7.5 or TS35/15 DIN rails. In addition to their primary output, both models provide a secondary output designed for use with battery chargers. Together with an external battery, this can facilitate a security power system with a DC UPS function. The devices accept a 90VAC to 264VAC full range input or a 127VDC to 370VDC input, and each comprises two models with different DC output voltages: 13.8V and 27.6V. All models operate with a working efficiency of up to 88%, allowing an operating temperature range of -30°C to +70°C, while needing only free air convection cooling.
AFC Cable Systems: Metal-clad cables
MC Luminary metal-clad cables combine electric lighting and control circuits under a single interlocked armor. Suitable for LED and fluorescent dimming, the cables feature two or three single copper THHN conductors, one single THHN insulated ground, and a twisted-jacketed pair of TFN conductors. Offered in two versions, the MC Tuff Luminary model is the lightweight galvanized steel interlocked armor cable, and the MC-Lite Luminary model is the interlocked aluminum armor cable. Both are offered in 120/208V or 277/480V conductor designs with a TFN conductor low-voltage control assembly under one armor.
AFC Cable Systems
CAS Dataloggers: Solar data logger
The PV-3 solar data logger measures and records solar irradiance and DC voltage/DC current, allowing users to check the efficiencies of their solar panels over various periods of time. For detailed analysis, Electrosoft software is included, allowing users to input the area of the system along with the panel efficiency, and thus calculate and compare the actual solar energy input versus the actual output. Designed to monitor one or two DC voltage channels from 1V to 60VDC, the device records PV systems with an output of up to 300VDC and up to 100A current. In addition, the product is IP65-rated for outdoor and indoor applications and can continue to record for up to 300 days or four weeks using its backup battery.
GTI Predictive Technology: iPad condition documentation tool
The VibeRMS LT is a single-channel vibration documentation tool. Users can view live vibration data (velocity, acceleration, displacement) and create reports at the site on the iPad. Reports include machine data, spectrum data, alerts and alarms, user notes, and integrated photos from the iPad. The Build Machine function includes templates for common machine types (motors, pumps, fans) and the ability to combine machine types to create machine train templates. Machine templates can also be built on site using a photograph of the machine. Measurement points are added by the user to complete the template.
GTI Predictive Technology