DC Power Uses Less Electricity than AC System at Duke Energy Data Center

Nov. 16, 2010
A preliminary test by the Electric Power Research Institute (EPRI) of a direct current (DC) power system at a Duke Energy data center in Charlotte, N.C., found that the system uses 15% less electricity than the existing alternating current (AC) power system

A preliminary test by the Electric Power Research Institute (EPRI) of a direct current (DC) power system at a Duke Energy data center in Charlotte, N.C., found that the system uses 15% less electricity than the existing alternating current (AC) power system.

The U.S. Environmental Protection Agency (EPA) reported to Congress that data center industry power consumption doubled from 2000 to 2006 and was expected to double again over the next 5 yr. If this trend continues to 2016, then reducing data centers’ energy consumption could reduce demand more than 25 billion kWh per year.

For the Duke Energy demonstration project, the data center’s 480VAC was converted to 380VDC and delivered to the equipment racks via a 380VDC bus. The 15% energy savings provides a good benchmark for the industry, because the 480VAC system configuration is typical for data centers across the United States.

Source: The Electric Power Research Institute

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Strut Comparison Chart

Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Electrical Conduit for Bridges Guide

Learn about electrical conduit for bridge projects.

Xpress Elbows Guide for Industrial Construction

Learn how to get expedited elbows shipped within 2 days.

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...