The current-carrying conductors in cablebus shall be sized in accordance with the design of the cablebus, and in no case smaller than _____ AWG.
a) 1/0
b) 2/0
c) 3/0
d) 4/0
See answer and applicable Code reference
The correct answer is: a) 1/0
Article 370 covers the use and installation requirements of cablebus and associated fittings. As noted in Sec. 370.20(A)(2), the current-carrying conductors in cablebus shall "be sized in accordance with the design of the cablebus but in no case be smaller than 1/0."
Mike Holt is the owner of Mike Holt Enterprises (www.MikeHolt.com), one of the largest electrical publishers in the United States. He earned a master's degree in the Business Administration Program (MBA) from the University of Miami. He earned his reputation as a National Electrical Code (NEC) expert by working his way up through the electrical trade. Formally a construction editor for two different trade publications, Mike started his career as an apprentice electrician and eventually became a master electrician, an electrical inspector, a contractor, and an educator. Mike has taught more than 1,000 classes on 30 different electrical-related subjects — ranging from alarm installations to exam preparation and voltage drop calculations. He continues to produce seminars, videos, books, and online training for the trade as well as contribute monthly Code content to EC&M magazine.
