Ohio electrical contractors implement new safety standard

Oct. 9, 2002
After a year of negotiations and 16 drafts, unionized electricians, contractors, and federal regulators in Columbus, Ohio, have reached an agreement to implement an NFPA safety standard that protects electrical workers on the job. First drafted in 1976 and updated regularly, NFPA 70E, “Electrical Safety Requirements for Employee Workplaces,” specifies protective clothing, face shields, and gloves

After a year of negotiations and 16 drafts, unionized electricians, contractors, and federal regulators in Columbus, Ohio, have reached an agreement to implement an NFPA safety standard that protects electrical workers on the job. First drafted in 1976 and updated regularly, NFPA 70E, “Electrical Safety Requirements for Employee Workplaces,” specifies protective clothing, face shields, and gloves for use on jobsites.

The Columbus office of OSHA, the Central Ohio chapter of NECA, and Locals 683 and 1105 of IBEW teamed up to develop the program. The National Joint Apprentice and Training Committee, will be responsible for development and coordination of training for the program.

Under the plan, contractors will purchase necessary safety equipment and administer the program. OSHA will monitor the program’s progress to make sure it’s proceeding correctly and according to the standard. The hope is that electrical workers will experience fewer injuries, their employers will have lower worker’s compensation costs, and the Columbus OSHA office will report a lower recordable-accident rate.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Champion Strut Catalog

Champion Fiberglass is the most advanced manufacturing facility of fiberglass conduit, fiberglass bridge drain and fiberglass strut systems in the world. Its well-trained and ...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.