74% Market Penetration Predicted for White-Light LED Sources

Aug. 19, 2013
Potential of Solid-State Lighting in General Illumination Applications report predicts growing reliance on LEDs will conserve 2,700 terawatt-hours (2.7 trillion kilowatt-hours) of energy use 

A comprehensive U.S. Department of Energy (DOE) report predicting the market penetration of light-emitting diode (LED) white-light sources from 2010 to 2030 is available free from the National Lighting Bureau. Titled Energy Savings Potential of Solid-State Lighting in General Illumination Applications, the report, released last year but not updated since, predicts that growing reliance on LEDs will conserve 2,700 terawatt-hours (2.7 trillion kilowatt-hours) of energy use over the 20-yr period, saving owners about $250 billion at today’s energy prices while reducing greenhouse-gas emissions by 1.8 billion tons of carbon, assuming today’s power-plant generating mix stays in place.

The report predicts that, compared to conventional incandescent, halogen, fluorescent, and high-intensity-discharge white-light sources, the rate of LED market penetration will increase steadily, rising to 36% of general-illumination lumen-hour sales in 2020, and to 74% by 2030.

“In 2030,” the report states, “the annual energy savings due to the increased market penetration of LED lighting is estimated to be approximately 300 terawatt-hours, or the equivalent annual electrical output of about fifty 1,000-megawatt power plants. At today’s energy prices, that would equate to approximately $30 billion in energy savings in 2030 alone. Assuming the current mix of generating power stations, these energy savings would reduce greenhouse gas emissions by 210 million metric tons of carbon. The total electricity consumption for lighting would decrease by roughly 46 percent relative to a scenario with no additional penetration of LED lighting in the market – enough electricity to completely power nearly 24 million homes in the U.S. today.”

According to National Lighting Bureau Chair Howard P. Lewis (Visioneering Corp.), who represents the Illuminating Engineering Society of North America (IES) on the Bureau’s board, “The predicted reductions in energy consumption, greenhouse-gas emissions, and operating and maintenance costs are extremely positive. Nonetheless, not just a few lighting-industry insiders believe that the role of LED lighting may not be quite as prominent as forecasted, principally because of the efficiency and longevity advances being made by alternative sources, fluorescent in particular. As such, LEDs may have more competition in the years ahead, not less, all of which is a good thing. More products and more types of products will be competing on the basis of efficiency, cost, and functionality, meaning not only that the study’s forecasts about energy and cost savings will likely be realized, they may even be exceeded.”

The study focused on the four principal sectors of the U.S. lighting market – residential, commercial, industrial, and outdoor stationary – where an array of lighting products competes for market share. The energy savings to be generated by steadily greater reliance on LEDs was established through comparison with a baseline model that assumed no additional market penetration of LEDs. 

Download a free copy of Energy Savings Potential of Solid-State Lighting in General Illumination Applications here.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.

8 Types of Electrical Conduit and Their Uses

Electrical conduit is a tube or raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges...

A Powerful Duo: Fiberglass conduit and solar applications

Learn how strong, durable fiberglass conduit excelled in an environment with dense cable and helped make a complex burial much simpler for the contractor to help this customer...

Champion Fiberglass® Conduit Protects Cabling For New York's First Offshore Wind Farm

Learn how fiberglass conduit supported a heavy cable load and a buried installation to help this project reach a successful outcome.