Screenshot 2023 04 05 150736 642dd51a4555d

Members Only Content

Moving Violations Video No. 284: Sharp Bend

April 6, 2023

Russ finds an outdoor installation that has a cable with a sharp bend.

In this episode of Moving Violations, Russ finds an outdoor installation that has a cable with a sharp bend. The bend in the cable, which most likely damaged the conductors, is a violation of Sec. 340.24. Another problem with this installation is that there are two cables going into the connector, which violates Sec. 110.3(B). Lastly, multiple cables in the installation are being used to support one another, which is against the rules for securing and supporting found in Sec. 300.11.

About the Author

Russ LeBlanc | Owner

Russ started in the electrical trade as an apprentice in 1985. He worked his way up to become a Journeyman Electrician and then eventually became a Master Electrician and Licensed Construction Supervisor. In 1999 Russ become an Electrical Instructor for The Peterson School of Engineering in Massachusetts where he developed his passion for teaching, and quickly became Department Head of Electrical Instruction. Russ has taught thousands of apprentices, electricians, engineers, inspectors, and other electrical professionals during his career as an instructor. He continues to provide electrical professionals with Electrical Code seminars, Arc-Flash Awareness training seminars and educational material through his LeBlanc Consulting Services in North Reading, MA whose specialty is educating electricians. He has been an active member of the NFPA Electrical Section and has authored hundreds of National Electrical Code proposals and comments which have become Code rules to improve the safety for the electrical industry. Russ is also an IAEI certified Electrical Inspector.

Please visit www.russleblanc.net for more information.