Champion Fiberglass Elbows. No Burn Through. All the Benefits. Since 1988, Champion Fiberglass, Inc. has set the standard for Reinforced Thermosetting Resin Conduit (RTRC). UL Listed and NEC-recognized Champion Duct® and Champion Haz Duct® elbows are available in sizes ranging from 3/4" – 6". Additional sizes from 8" – 12" are available (non-UL Listed). Champion Fiberglass offers the best solution for standard long radius and custom elbows. We have an assortment of transition and termination options available for use with our fiberglass electrical conduit system or many other conduit systems. We also offer a complete line of fiberglass conduit products including: fittings, strut and bridge hangers. Utilities, electrical contractors, and specifying engineers choose our fiberglass products for an electrical conduit system with a long life and low maintenance. OUR FIBERGLASS ELBOW ADVANTAGES • Low Coefficient of Friction Consistently one of the lowest coefficients of friction of any conduit system. Allows for long conduit runs without a pull box. • No Burn Through A low coefficient of friction and a single-circuit winding process keep cables from burning through the fiberglass elbow and damaging the cable. • Easy to Install – When using two deep socket PVC couplings, the fiberglass elbows are easily glued in place using PVC Solvent Cement. – When using a deep socket coupling and a female adapter, our fiberglass elbows are easily transitioned between PVC and rigid steel conduit systems. • Light Weight Compare a 4", 90° x 36° radius elbow: 8.5 lbs – fiberglass w/ two PVC couplings 64 lbs – galvanized rigid steel • Excellent Corrosion Resistance Broadest range of corrosion resistance of any conduit system. • Not Affected by Cable Faults Will not melt fiberglass conduit or weld the cable to the conduit. • Excellent Insulator Because fiberglass conduit is non- conductive, grounding bushings and exothermic grounding are not required for protection during a cable fault. • UL Listed Use our UL 2515 for Above Ground and UL 2420 for Below Ground. • UV Stable Maintains its mechanical/physical properties when exposed to the damaging effects of UV sunlight. • Cost Effective Comparable installed systems give fiberglass conduit the price advantage. 6400 Spring Stuebner Rd, Spring, TX 77389 Main: 281.655.8900 Fax: 281.257.2523 championfiberglass.com Champion Fiberglass Elbows. No burn through. All the benefits. / Page 2 COMMON PART NUMBERS W/ 2 PVC DEEP SOCKET COUPLINGS ELBOWS ARE AVAILABLE IN: • Sizes 3/4" to 12" • Other radii including very large radii • Other angles as standard (11-1/4°, 22-1/2°, 30°) • Below ground or above ground • Plain end for fiberglass conduit systems • Various factory installed fiberglass fittings • Standard PVC fittings on some sizes SIZE DESCRIPTION PART NUMBER 2" SW 45° x 24" radius, above ground 20CSW812D 2" SW 45° x 36" radius, above ground 20CSW822D 2" SW 90° x 24" radius, above ground 20CSW912D 2" SW 90° x 36" radius, above ground 20CSW922D 2-1/2" SW 45° x 24" radius, above ground 25CSW812D 2-1/2" SW 45° x 36" radius, above ground 25CSW822D 2-1/2" SW 90° x 24" radius, above ground 25CSW912D 2-1/2" SW 90° x 36" radius, above ground 25CSW922D 3" SW 45° x 36" radius, above ground 30CSW822D 3" SW 45° x 48" radius, above ground 30CSW832D 3" SW 90° x 36" radius, above ground 30CSW922D 3" SW 90° x 48" radius, above ground 30CSW932D 4" SW 45° x 36" radius, above ground 40CSW822D 4" SW 45° x 48" radius, above ground 40CSW832D 4" SW 90° x 36" radius, above ground 40CSW922D 4" SW 90° x 48" radius, above ground 40CSW932D 4" HW 45° x 36" radius, above ground 40CHW822D 4" HW 45° x 48" radius, above ground 40CHW832D 4" HW 90° x 36" radius, above ground 40CHW922D 4" HW 90° x 48" radius, above ground 40CHW932D 5" MW 45° x 48" radius, above ground 50CMW832D 5" MW 45° x 60" radius, above ground 50CMW842D 5" MW 90° x 48" radius, above ground 50CMW932D 5" MW 90° x 60" radius, above ground 50CMW942D 5" HW 45° x 48" radius, above ground 50CHW832D 5" HW 45° x 60" radius, above ground 50CHW842D 5" HW 90° x 48" radius, above ground 50CHW932D 5" HW 90° x 60" radius, above ground 50CHW942D 6" MW 45° x 48" radius, above ground 60CMW832D 6" MW 45° x 60" radius, above ground 60CMW842D 6" MW 90° x 48" radius, above ground 60CMW932D 6" MW 90° x 60" radius, above ground 60CMW942D 6" HW 45° x 48" radius, above ground 60CHW832D 6" HW 45° x 60" radius, above ground 60CHW842D 6" HW 90° x 48" radius, above ground 60CHW932D 6" HW 90° x 60" radius, above ground 60CHW942D 6400 Spring Stuebner Rd, Spring, TX 77389 Main: 281.655.8900 Fax: 281.257.2523 championfiberglass.com