Test & Measurement

Electrical Testing Quiz: Arc-Flash Reduction Techniques

Oct. 1, 2024

It’s time to test your knowledge on arc-flash reduction techniques.

Many of the routine electrical system tests and inspections performed may expose workers to electrical hazards. ANSI/NETA MTS, Standard for Maintenance Testing Specifications for Electrical Power Equipment & Systems specifies that individuals performing these tests shall be qualified and capable of conducting the tests in a safe manner and with complete knowledge of the hazards involved.

One of these hazards is arc flash. This quiz will look at some arc-flash reduction techniques. The first two questions start with identifying the arc-flash hazard and the other four questions cover some arc-flash reduction techniques.

Electrical Testing Education articles are provided by the InterNational Electrical Testing Association (NETA), www.NETAworld.org. NETA was formed in 1972 to establish uniform testing procedures for electrical equipment and systems. Today the association accredits electrical testing companies; certifies electrical testing technicians; publishes the ANSI/NETA Standards for Acceptance Testing, Maintenance Testing, Commissioning, and the Certification of Electrical Test Technicians; and provides training through its annual conferences (PowerTest and EPIC — Electrical Power Innovations Conference) and its expansive library of educational resources.

About the Author

Virginia Balitski

Virginia Balitski, CET, Manager – Training and Development, has worked for Magna IV Engineering since 2006. Virginia started her career as a Field Service Technologist and achieved NETA Level 4 Senior Technician certification. She is also a Certified Engineering Technologist through ASET – The Association of Science & Engineering Technology Professionals of Alberta. Virginia has since dedicated her time to the advancement of training and safety in the electrical industry. She is the current vice-chair of the CSA Z462, Workplace Electrical Safety Committee; is a member of the NFPA 70E, Electrical Safety in the Workplace Technical Committee; and represents NETA on the ASTM F18 Committee. Virginia serves on NETA’s Board of Directors and is involved with many NETA committees.