Screenshot 2023 02 16 091744 63ee49ecc07d9

Members Only Content

Moving Violations Video No. 281: Ride the Wave

Feb. 16, 2023

Russ shows us a couple of violations with a rigid PVC installation.

In this episode, Russ shows us a couple of violations with a rigid PVC installation. As you can see in the video, the PVC is drooping and sagging along its entire horizontal run. This occurred because the installer didn’t provide adequate support clips (as required by Sec. 352.30) or install expansion fittings as required by Sec. 352.44(A).

About the Author

Russ LeBlanc | Owner

Russ started in the electrical trade as an apprentice in 1985. He worked his way up to become a Journeyman Electrician and then eventually became a Master Electrician and Licensed Construction Supervisor. In 1999 Russ become an Electrical Instructor for The Peterson School of Engineering in Massachusetts where he developed his passion for teaching, and quickly became Department Head of Electrical Instruction. Russ has taught thousands of apprentices, electricians, engineers, inspectors, and other electrical professionals during his career as an instructor. He continues to provide electrical professionals with Electrical Code seminars, Arc-Flash Awareness training seminars and educational material through his LeBlanc Consulting Services in North Reading, MA whose specialty is educating electricians. He has been an active member of the NFPA Electrical Section and has authored hundreds of National Electrical Code proposals and comments which have become Code rules to improve the safety for the electrical industry. Russ is also an IAEI certified Electrical Inspector.

Please visit www.russleblanc.net for more information.