Class 2 and Class 3 plenum cables listed as suitable for use in ducts, plenums, and other spaces used for environmental air shall be Type _____.
a) CL2P and CL3P
b) CL2R and CL3R
c) CL2 and CL3
d) PLTC
See answer and applicable Code reference
The correct answer is: a) CL2P and CL3P
Article 725 covers remote-control, signaling, and power-limited circuits that are not an integral part of a device or appliance. Part IV of this Article focuses on listing requirements. As per 725.179(A), "Types CL2P and CL3P plenum cable shall be listed as being suitable for use in ducts, plenums, and other space for environmental air and shall also be listed as having adequate fire-resistant and low-smoke producing characteristics."
About the Author
Mike Holt
Mike Holt is the owner of Mike Holt Enterprises (www.MikeHolt.com), one of the largest electrical publishers in the United States. He earned a master's degree in the Business Administration Program (MBA) from the University of Miami. He earned his reputation as a National Electrical Code (NEC) expert by working his way up through the electrical trade. Formally a construction editor for two different trade publications, Mike started his career as an apprentice electrician and eventually became a master electrician, an electrical inspector, a contractor, and an educator. Mike has taught more than 1,000 classes on 30 different electrical-related subjects — ranging from alarm installations to exam preparation and voltage drop calculations. He continues to produce seminars, videos, books, and online training for the trade as well as contribute monthly Code content to EC&M magazine.
